Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems Sani-Tech STHT-R tubing, 50-foot, ID 0.750"" x OD 1.125"" x Wall 0.187"" is manufactured from the finest grade of silicone materials and is fully characterized, validated and tested to a variety of specifications including USP Class VI criteria, ISO 10993 and European Pharmaco...
Sani-Tech STHT-R platinum-cured braid-reinforced silicone hose is an ultra-flexible, high-purity hose that was developed for higher pressure applications. STHT-R is manufactured with Sani-Tech 65 brand silicone resin. Sani-Tech STHT-R platinum-cured silicone hose resists temperature extremes, ozone, corona, radiation, moisture, compression sets, weathering and chemical attack and imparts no taste or odors to fluids transported within it. Sani-Tech STHT-R hose withstands repeated autoclaving and resists the adherence of bloodproducts and other sanitary fluids.
Accuflow Systems Sani-Tech STHT-R tubing, 50-foot, ID 0.187"" x OD 0.447"" x Wall 0.130"" is manufactured from the finest grade of silicone materials and is fully characterized, validated and tested to a variety of specifications including USP Class VI criteria, ISO 10993 and European Pharmaco...
Sani-Tech STHT-R platinum-cured braid-reinforced silicone hose is an ultra-flexible, high-purity hose that was developed for higher pressure applications. STHT-R is manufactured with Sani-Tech 65 brand silicone resin. Sani-Tech STHT-R platinum-cured silicone hose resists temperature extremes, ozone, corona, radiation, moisture, compression sets, weathering and chemical attack and imparts no taste or odors to fluids transported within it. Sani-Tech STHT-R hose withstands repeated autoclaving and resists the adherence of bloodproducts and other sanitary fluids.
Accuflow Systems C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon E-3603, Non-DEHP Vacuum, 5/8"" ID x 1 3/8"" OD; 10 ft
Formulation: Tygon E-3603 vacuum Applications: General lab, food and beverage, and biopharm. Vacuum service of 29.9" Hg (760 mm Hg) at 73¿F (23¿C). Characteristics: Non-DEHP, phthalate-free plasticizer. Flexible, biodegradable, crack-resistant, nontoxic, and nonoxidizing. Clear. Certifications: USP Class VI and NSF 51 Temperature range: Brittle temperature is -51F (-46¿C). Sterilize: Ethylene oxide or autoclave for 30 min at 250¿F (121¿C), 15 psi (1 bar).
Microsolv Technology Corporation Tubing, PTFE, 1.70" ID, 2mm OD, Low Pressure. 5 Meter Roll. 1 EA.
This MicroSolv, Thin Walled, PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Natural PTFE, Translucent ID: 1.70mmPressure rating: 150 psi.
AVANTOR MASTERFLEX (VWR LLC) Dow Corning Pharma-50 Tubing, 1/8"" x 1/4"", 50 ft Pack
Applications: Pharmaceutical, biotechnology , and ultra-pure fluid processing. Characteristics: 50 durometer, translucent platinum-cured silicone tubing with a very low extractable profile; it contains no phthalates, plasticizers, latex, or other organic additives. Pharma tubing remains flexible and resilient for long service life. Dow Corning maintains complete traceability from silica to silicone tubing. Certifications: Elastomer exceeds test guidelines for USP Class VI Plastics, and the tubing itself is FDA compliant, and meets 3A Sanitary Standards and European Pharmacopoeia (EP) requirements. Produced under Bulk Pharmaceutical (BP) and current GMP principles. Temperature range: ¿60 to 460¿F (¿51 to 232¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) 2-STP PURI-CLEAR 0.51MMID 12PK
NC3253983 2-STP PURI-CLEAR 0.51MMID 12PK
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, Similar to SC0461, Peroxide-Cured Silicone, 2.79 mm ID; 50 ft
Reduce the risk of particulate entrapment with smooth inner surface. Tubing undergoes robust testing to provide optimal performance / pump life hours with peristaltic pump equipment. Precision extruded to tight tolerances for high repeatability, accuracy and reproducibility. Global market leader in range of formulations for most extensive chemical compatibility.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Flexible Vinyl, 1/16"" ID x 1/8"" OD; 100 ft
A good general-purpose tubing material, vinyl tubing (also known as PVC tubing) offers good chemical resistance. Its transparency allows easy visual identification of flow through the tube. This vinyl tubing's good abrasion resistance means you can use it in a laboratory, on a shop floor, or on a production bench. Vinyl tubing can be used within the temperature range of -45 to 180¿F (-43 to 82¿C).